How to Install Mobile Signal Booster

A signal booster is the most effective way to improve signal reception. But you need to install it properly before you can enjoy its benefits like less dropped calls, better call quality and faster data transfer speed at  home, office or on the go. The performance of the signal amplifier depends more on  proper installation.

How to install it?

Before you can experience the benefits of a mobile  signal booster, you need to install the right mobile signal booster. This will activate your lazy network, so follow the steps below.

Find a strong network zone outside

Firstly you need to find an area where you get the strongest network. An amplifier is used to strengthen the cell signal in a poor cell reception area. The most important part of the installation is the exact location of the outdoor antenna with the best signal, because it communicates with the cell tower and picks up its signal. The reception signal strength affects the indoor signal strength and coverage area.

There are three different ways to find  the strongest signal near you.

• Use cell phone signal bar
• Use the LCD on the repeater
• Use a cell phone signal app

Installation of outside antenna

Install the outdoor antenna  where  the signal is best, place it as high as possible, usually at the top of a building. It is very important to have a separate distance between the indoor  and  outdoor antennas to avoid  interference between the two antennas,  also known as oscillation.  Please note that the outdoor antenna must be pointed at the nearest cell tower.

Connect to amplifier

After the installation of the outside antenna connect it with the amplifier using the supplied coaxial cables. It should be placed near an outlet with good ventilation, away from direct sunlight and moisture.

Installation of inside antenna

Find out the place you decide to install the antenna, mount the antenna with bracket and screws.

Generally, the indoor antenna includes a panel antenna and Omni-ceiling antenna. The former is usually installed on the wall and the latter is mounted on the ceiling. At last, put the antenna on it, and connect it with the amplifier.

Power on

Plug in the amplifier to the power supplier and to the wall outlet. After all this, it gets synced up. Now you can experience high-quality calls, download your videos faster, and enjoy your fast phone signal. These are the step through which you can install a booster anywhere like the basement, flat, building, etc.

Installation of Mobile Signal Booster without Technician

The mobile signal booster is easy to install. The first thing you should do when you receive a kit is to read the manual, and you can do the installation without the help of an engineer if you are also not technically competent. This page also provides information on how to install the kit.

You can also call our tech support  on 9717968806 if you have any problems with the installation.